With the continuous development of science and technology, customers now have higher and higher requirements for the precision of precision parts processing products, so the requirements for precision parts processing manufacturers are also increasing. Today, I will introduce to you what problems in precision parts processing products need pay attention.
1. Whether the materials for precision parts processing are suitable for automatic processing. Under normal circumstances, materials such as brass, aluminum alloy, and ordinary carbon steel have better processing performance, and the degree of grinding of CNC tools is relatively small, so they are more suitable for processing with automatic lathes. Compared with parts with poor processing performance such as high-speed steel and stainless steel, precision processing is difficult, the CNC tool is seriously damaged during processing, or excrement is troublesome when processing materials such as copper, and many other stainless steel plates are not suitable for serious work hardening. Fully automatic lathe processing.
2. The aperture size, length, and processing process of precision parts are not suitable for automatic lathe processing. According to the above analysis, it is necessary to analyze whether a workpiece is suitable for automatic processing by automatic lathes, and it is not necessarily suitable for automatic processing by automatic lathes only for mass-produced products.
3. Precision parts processing is generally suitable for automatic lathe processing after large-scale product CNC processing, because automatic lathes can realize fully automatic processing of workpieces, using special automatic punch frames and welding fixtures, the speed is fast, but many parts choose special The design can further improve productivity, so if the batch of workpieces is small, it is necessary to adjust the welding fixture and automatic feeding mechanism, etc., which is very troublesome.
4. The processing of structural precision parts should adopt automatic feeding processing. When using an automatic lathe for processing, the structure of the workpiece should be appropriate, the arrangement of the workpiece should be fully automated, and automatic loading should be applied. (If the workpiece can still be loaded by an automatic feeding mechanism such as a vibrating plate, or whether the long-axis parts are suitable for automatic feeding by a hopper, it is really not conducive to manual discharge on the linear slide rail; in addition, when the cross-section of the workpiece is Round, hexagonal, etc., it is suitable for automatic processing, but it is more difficult for automatic processing if the type is more complicated)