When processing precision parts, the operator must maintain the correct posture and have sufficient mental essence to arrange the work. If he finds that he is unwell, to ensure personal safety, he will immediately remove the job post and report to the supervisor of the production workshop or a higher level. people reflect. The concept of practical operation is gathered, chatting is prohibited, and mutual cooperation is prohibited. The operator must not operate under the condition of irritability and fatigue, so as to ensure personal safety, avoid accidents, and ensure safe operation. All employees are asked whether their attire meets the job requirements before entering the workplace. What else should be paid attention to in the processing of precision parts? Let us understand together below.
1. Before processing precision parts, check whether the moving parts of the equipment are greased, and then whether to start and check the clutch, whether the brake system is normal, and rotate the idling parts of the CNC lathe for 1-3 minutes. When the mechanical equipment has a fault, it is forbidden to operate operate;
2. When processing precision parts, maintain a correct posture and have sufficient mental quality to cope with the work. If you find that you feel unwell, you must leave the post immediately and report to your superiors. In practice, the concept is concentrated, gossip is prohibited, and mutual cooperation is allowed. The operator must not operate under the condition of irritability and fatigue, so as to avoid safety accidents and ensure practice. All employees check whether their attire meets the requirements before entering the post. Sandals, high-heeled shoes and harmful clothing are not allowed, and hats are required for long hair;
3. When removing and replacing the abrasive tool, cut off the power first, and the high-speed punching machine motion unit stops running before installing and adjusting the abrasive tool. After the installation and adjustment, move the flywheel of the pump vigorously for 2 times to check whether the left and right grinding tools are symmetrical, whether they are effective, whether the screws are firm, and whether the hemming strip is in the effective position;
4. After all other workers leave the working area of the mechanical equipment and take out the dirt on the workbench, the mechanical equipment can be turned on;
5. During the processing of precision parts, it is strictly forbidden to put your hands into the working area of the guide rail slide plate, and it is not allowed to take or put the product workpiece vigorously. It is a special tool suitable for picking and placing product workpieces in the punching die. If it is found that the machine equipment has abnormal noise or the equipment is abnormal, the main switch should be turned off immediately for inspection. After the machine is started, one person is transported to the machine for actual operation. Others are not allowed to press the power switch or step on the button switch board, let alone put their hands in the working area of the machine or touch the moving parts of the machine forcibly.
6. After get off work, turn off the idle switching power supply, and clean up the workpiece, leftovers and dirt to ensure a clean office environment.