The processing method of the processing procedure of CNC lathes is divided into the main test rate production program. The equipment used by the Dehui Precision Machinery Processing Center and the requirements of the structural technology requirements of the parts itself are operated. In large quantities, if you use a multi -axis and multi -knife efficient machining center. It is necessary to organize the production according to the principles of the procedure. If it is processed on the automatic line with a combined machine tool, the process will generally operate the division in accordance with the principle of decentralization.
1. CNC lathes processing and mass production are operated according to the processing procedures of thickness and precision. Regarding parts with large amount of hair in hair embryos and high processing precision requirements. Taoism or more program operations must be arranged on CNC lathes with lower precision and high -precision CNC lathes, and arranging the precision cars on CNC lathes with higher precision.
2. CNC lathes are divided according to the surface of the parts, and the surface with higher precision requirements is arranged in a fiber. So as not to make a installation error, it will also affect the precision of the CNC processing position.
3. On the processing parts of CNC lathes, the process is generally divided according to the procedure method of the process concentration, and most or even all the surface processing will be completed as possible under the clip. The outer circle, the end surface or the inner hole clamp, and try to ensure the design benchmark, the procedure benchmark and the unified program operation of the programming origin to complete.